The Oxford Heaterz Premium ATV heated handlebar grips are made especially for ATV's. The grips have ergonomically engineered surface structures to optimize riding performance. Thicker rubber in areas of maximum wear; rhombus tread patterns for high levels of grip and feel; diamond tread pattern where maximum grip is required. What really sets the Oxford Heaterz apart? The answer is many tried and tested features such as the silicon cables which provide flexibility in the coldest weathers and the winter grade wiring prevents cracking and short circuits; the bonded grip design has been in use for many years and is well proven; the grip compound and thermo plastic rubber construction is designed to absorb vibration making them extremely comfortable and durable, often outlasting standard grips and the silicone wires that come from the grip are angled to eliminate water ingress and resulting corrosion/ice damage and have special unique internal supports which are heat shrunk together to prevent damage if the wires are snagged. In addition, five carefully chosen heat settings allow the perfect temperature to be selected in ALL weathers and most importantly, the switch will switch off if the voltage drops to 10.5V to ensure that the battery is not damaged to the point that it cannot be recharged to full capacity. This latest Premium range is the result of over 30 years of research and development by engineers and motorcyclists, which are now easier than ever to fit due to the new intelligent heat controller eliminating any need to wire the positive to a live ignition feed; simply connect the 2 ring connectors to the battery. You'll find everything supplied by Oxford to fit your Heaterz from a wiring loom with ring connectors to the battery with simple plug and play waterproof connectors to attach to the switch and grips, smart mounting bracket and switch right down to the glue and cable ties all neatly packaged in one box.
Standard Features for all Heaterz models:
- Sealed for life
- Up to 122°F (50°C)
- Rainproof switch
- Draws under 4A
Additional Heaterz Premium ATV Grip Features:
New Switch Features:
Standard for all Heaterz Premium ATV EL7 models
- 5 heat settings give the perfect operating temperature with LED lights to indicate the level
- Miniaturised electronics
- Robotised manufacuring
- Simpler wiring
- Sonically welded
- Waterproof connectors
These Premium ATV Heaterz are designed as a replacement for the handlebar grips already fitted to the ATV. They will fit onto most ATV's that use 7/8" (22mm) Ø handlebars. The standard length of the Premium ATV Heaterz grip is 5.12"" (130mm). Should the length need to be shortened, they can be trimmed to a minimum length of 4.76" (121mm) without damaging the heating elements. External grip Ø = 1.35" (34.2mm).
EL770Z Heaterz Premium ATV
EL770LH Replacement LEFT Grip with waterproof connector
EL770RH Replacement RIGHT Grip with waterproof connector
ELV8R Intelligent heat controller with waterproof connectors
OF770EC Alloy end ap (each)
Easy to install...